V2414 Stock ROM Download - Vivo Y100 Firmware PD2414F_EX_A_15.0.2.9.W15 Android 15
Vivo Y100 | V2414 | Updated November 2026

Owners of the Vivo Y100 often find this page after a repair shop quotes more than the phone is worth, which is exactly the situation a stock firmware reinstall is designed for. The package carries build PD2414F_EX_A_15.0.2.9.W15, runs Android 15 with Funtouch OS 15, and is a ZIP (PD firmware package) download of 4.6 GB. Because it is a full image, it also fixes problems that a factory reset cannot touch, such as a damaged system partition.
Charge the battery above 50 percent and use the original USB cable if you can find it. The steps below assume a Windows PC, a working USB port and the correct driver already installed.
Images in this package
The archive is not a single file. Knowing which image does what helps you understand why a partial flash can leave the phone half working.
| Image | Approx. size | Purpose |
|---|---|---|
| boot.img | 0.09 GB | Kernel and ramdisk used during startup. |
| system.img | 2.21 GB | Android system, preinstalled apps and framework files. |
| vendor.img | 1.01 GB | Hardware libraries, camera and modem interfaces. |
| product.img | 0.64 GB | Regional apps, themes and carrier customisation. |
| modem.img | 0.14 GB | Radio firmware for the Indonesia network bands. |
Extracted sizes vary by region and by the compression method used. The numbers above are close estimates for this 4.6 GB package, not a guarantee.
Firmware facts for this build
These are the details that matter before you download anything. Compare the model code and build string with the phone in your hand, not with a listing photo.
| Brand | Vivo |
| Model number | V2414 |
| Device | Y100 |
| Android version | Android 15 |
| OS version | Funtouch OS 15 |
| Firmware version | PD2414F_EX_A_15.0.2.9.W15 |
| Build number | PD2414F_EX_A_15.0.2.9.W15 |
| Region / CSC | ID (Indonesia) |
| Security patch | April 2026 |
| Firmware type | Official PD Firmware |
| File format | ZIP (PD firmware package) |
| File size | 4.6 GB |
| Package contents | boot, system, vendor and modem images with a scatter file |
| SHA-256 | 42fa3f1b7733808907800d1d0a101fbf9482ce6553793545227236613a527434 |
Error messages and what they mean
Most failed flashes fall into one of six patterns. Match the message on your screen with the table before you change anything on the phone.
| Problem | What to do |
|---|---|
| SP Flash Tool shows a DA download error | Install the MediaTek VCOM driver again, hold Volume Up while connecting, and disable driver signature enforcement before retrying. |
| Proximity sensor stops working after the update | Recalibrate the sensor from the hidden service menu or flash the previous build. This is a known issue on a small number of units. |
| The write reaches 99 percent and freezes | Wait five minutes, then check the log. If no partition is progressing, stop the tool, reconnect and flash again with a different USB port. |
| FRP or account verification appears after setup | The phone still has the previous owner's account. Official firmware does not remove account locks; use the recovery options available to the rightful owner. |
| Phone boots straight to recovery after flashing | The data partition is encrypted with the old key. Perform a factory reset from recovery, then let the phone rebuild the partition. |
| Battery drains faster than before | Give the phone three charge cycles to settle, then check battery usage for a background app that is holding the device awake. |
If the phone shows a hardware fault such as a swollen battery, a cracked board or liquid damage, software cannot fix it. Stop and take the device to an authorised service centre.
Download Y100 firmware
Package PD2414F_EX_A_15.0.2.9.W15 is distributed as a ZIP (PD firmware package) of 4.6 GB for Indonesia. The same archive is used for a repair install and for a clean reinstall, so you only need to download it once.
this Vivo firmware and recovery guide
If the download stops halfway, delete the partial file and start again. A truncated archive is the most common cause of a checksum error in SP Flash Tool.
Load the scatter file or OFP package in SP Flash Tool v5.2, select download only for an update and firmware upgrade for a full repair.
Region and CSC codes
Vivo ships the same hardware with different regional packages. The CSC or region code decides which carrier profiles, languages and update servers the phone uses after flashing.
| Code | Region | Build |
|---|---|---|
| EX | Global export | PD2414F_EX_A_15.0.2.9.W14 |
| IN | India | PD2414F_EX_A_15.0.2.9.W13 |
| ID | Indonesia | PD2414F_EX_A_15.0.2.9.W15 |
| TH | Thailand | PD2414F_EX_A_15.0.2.9.W11 |
| MY | Malaysia | PD2414F_EX_A_15.0.2.9.W10 |
| PH | Philippines | PD2414F_EX_A_15.0.2.9.W9 |
The bold row is the package described on this page. If you are repairing a phone for use in another country, choose the row that matches the SIM you will actually use.
Installation instructions
The process below is the one that matches this package. Read every step before you touch the phone, and keep the log window visible so you can see where a failure happens.
- Install vivo USB Driver 1.0.8 and extract SP Flash Tool v5.2 and the firmware archive on the PC.
- Open the scatter file inside the package if the tool asks for one. For OFP packages, load the .ofp file directly.
- Power off the phone and remove the SIM tray if the model requires it.
- Hold Volume Up and connect the USB cable to enter download or EDL mode. The tool should detect the port.
- Select Download Only for an update that keeps data, or Firmware Upgrade for a full repair.
- Press Download or Start and wait while the tool writes the partitions.
- Do not touch the phone until the tool reports a green success message.
- Disconnect the cable and hold Power for ten seconds if the phone does not restart by itself.
- Check the build number in Settings after the first boot to confirm the flash worked.
What this firmware brings
The build is a maintenance release at heart, and most of the work sits under the hood rather than in the visible interface.
- Runs Android 15 with Funtouch OS 15 on top, matching the firmware branch that shipped for this model.
- Charging behaviour at low battery percentages is tuned to reduce heat during fast charging.
- Battery drain reports that followed the previous patch are addressed in this build, according to the changelog summary.
- Touch response and proximity sensor behaviour during calls are recalibrated in this release.
- Network switching between 4G and 5G has been adjusted for carriers in Indonesia.
- Wi-Fi calling and VoLTE profiles for Indonesia operators are included in the regional data.
Firmware screenshots
The images below show the screens to compare before and after flashing. Keep the same file names and alt text if you replace them with your own captures so search engines can still match them to the model.
File name: y100-v2414-about-phone.svg | Alt text: Vivo Y100 V2414 about phone screenshot
File name: y100-v2414-software-information.svg | Alt text: Vivo Y100 V2414 software information screenshot
File name: y100-v2414-firmware-package.svg | Alt text: Vivo Y100 V2414 firmware package screenshot
File name: y100-v2414-flashing-tool.svg | Alt text: Vivo Y100 V2414 flashing tool screenshot
After the flash
A successful write is only half the job. These checks catch the small problems that are easier to fix before you rely on the phone again.
- Open Settings, About phone and confirm the build number matches PD2414F_EX_A_15.0.2.9.W15.
- Test calls, mobile data, Wi-Fi and Bluetooth before you restore your apps.
- Check that the fingerprint sensor and face unlock still work. A clean flash usually keeps them, but it is worth confirming.
- Run the camera in photo and video mode for a minute to make sure the image stabilisation initialises.
- Restore your backup only after the phone has settled for ten minutes, otherwise the restore competes with background setup.
If the build number still shows the old value, the flash did not complete. Repeat the process with a fresh extraction rather than flashing the same half unpacked folder again.
Questions about this firmware
Can I flash only the system file?
A repair install needs every image in the archive. Writing a single system file often leaves the modem and regional settings untouched, so the phone can boot with the old faults still in place.
Is this PD2414F_EX_A_15.0.2.9.W15 firmware official?
Yes. The package is a signed official pd firmware released for the V2414, and it is the same file an authorised service centre would use for a software reinstall.
Will flashing erase my data?
A full flash wipes the internal storage. If you choose the keep data option in the flashing tool, your files can survive, but a backup is still the safer choice.
Do I need to root the phone first?
No. Root is not required and can actually cause the flash to fail on devices with verified boot. Use the official package on an unmodified phone.
Why does my phone show a different region after flashing?
The CSC or region code in the package decides that. Flash the build for the country where you use the phone if you want local carrier features and update servers.
Is a Google Drive mirror available?
Not for this build. Use the official brand support page linked above. Mirror copies are often repacked and cannot be trusted for a repair.
How long does the first boot take?
Expect five to ten minutes. The phone rebuilds the runtime cache and verifies the system partition, so a slow first start is normal.