Vivo V11i V1801 Firmware Download - PD1801F_EX_A_9.0.5.5.W50 (Android 9)
Vivo V11i | V1801 | Updated November 2026

This page covers the Vivo V11i and its PD1801F_EX_A_9.0.5.5.W50 package in plain language, including what the file contains, which models it fits and what can go wrong during flashing. It is a full ZIP (PD firmware package) image of 5.5 GB, not a small OTA, so the phone must be at or below the bootloader revision named in the file. Use the package for a clean reinstall before selling the phone, so the next owner starts on a known official build.
Read the compatibility section before downloading, because the model code matters more than the marketing name. A slow first boot of five to ten minutes is normal after a full firmware write.
V11i firmware download links
Package PD1801F_EX_A_9.0.5.5.W50 is distributed as a ZIP (PD firmware package) of 5.5 GB for Global export. The same archive is used for a repair install and for a clean reinstall, so you only need to download it once.
No Google Drive mirror is published for this build. Third party mirrors often carry modified files, so use the official package and verify the SHA-256 value.
Load the scatter file or OFP package in SP Flash Tool v5.2, select download only for an update and firmware upgrade for a full repair.
Common installation errors and fixes
Most failed flashes fall into one of six patterns. Match the message on your screen with the table before you change anything on the phone.
| Problem | What to do |
|---|---|
| Phone boots straight to recovery after flashing | The data partition is encrypted with the old key. Perform a factory reset from recovery, then let the phone rebuild the partition. |
| Phone heats up and reboots during the flash | Stop the process, let the phone cool for twenty minutes and use a powered USB port. Heat during a write usually means the battery is failing. |
| Checksum error during extraction | The download is incomplete. Delete it, clear the browser cache and download the archive again before extracting. |
| Invalid scatter file in SP Flash Tool | Point the tool at the scatter file inside the extracted folder, not at the ZIP, and make sure the file was not renamed. |
| FRP or account verification appears after setup | The phone still has the previous owner's account. Official firmware does not remove account locks; use the recovery options available to the rightful owner. |
| Proximity sensor stops working after the update | Recalibrate the sensor from the hidden service menu or flash the previous build. This is a known issue on a small number of units. |
If the phone shows a hardware fault such as a swollen battery, a cracked board or liquid damage, software cannot fix it. Stop and take the device to an authorised service centre.
Pre-flash checklist
Ten minutes of preparation saves an hour of troubleshooting. Work through this list in order and do not skip the backup step.
- Charge the battery to at least 50 percent. A flash that loses power halfway is harder to recover than the original problem.
- Back up photos, videos, chats, call logs, contacts and authenticator codes to a PC or cloud account you can reach from another device.
- Write down the model code, current build number, Android version and CSC before you begin.
- Install vivo USB Driver 1.0.8 and reboot the PC once, so the port is recognised the first time the phone connects.
- Download SP Flash Tool 5.2 and WinRAR 7.0 and extract the firmware with 7-Zip rather than the built in Windows unzip tool.
- Disable antivirus real time scanning for the extracted folder. Some suites quarantine the flashing tool by mistake.
- Use a USB 2.0 port on the back of a desktop PC if possible, and avoid hubs, extensions and laptop docking stations.
Previous firmware versions
The last four packages for the V1801 are listed below, newest first. A newer build is not always better for an imported phone, so match the region before you chase the highest number.
| Build | Android | Released | Notes |
|---|---|---|---|
| PD1801F_EX_A_9.0.5.5.W49 | Android 9 | May 2022 | Previous stable build |
| PD1801F_EX_A_9.0.5.5.W48 | Android 9 | April 2022 | Security only release |
| PD1801F_EX_A_9.0.5.5.W47 | Android 9 | March 2022 | Carrier update |
| PD1801F_EX_A_9.0.5.5.W46 | Android 9 | February 2022 | Older regional package |
Compatibility notes
Compatibility is decided by the model code, not by the name printed on the box. Read this list before you connect the phone.
- V1801 only. The package checks the model string before it writes anything, and a mismatch stops the flash.
- Dual SIM versions sold as V1801 (PD variant) use the same system image and are covered by this build.
- Regional codes IN (India), ID (Indonesia), TH (Thailand), MY (Malaysia) share the same hardware, but flashing a different CSC changes carrier settings and may disable local features.
- Do not flash a 5G variant with this package. The modem firmware and partition table are different.
- Carrier locked units should stay on the CSC that matches the SIM lock, otherwise the phone may ask for a network code after boot.
Firmware details at a glance
These are the details that matter before you download anything. Compare the model code and build string with the phone in your hand, not with a listing photo.
| Brand | Vivo |
| Model number | V1801 |
| Device | V11i |
| Android version | Android 9 |
| OS version | Funtouch OS 9 |
| Firmware version | PD1801F_EX_A_9.0.5.5.W50 |
| Build number | PD1801F_EX_A_9.0.5.5.W50 |
| Region / CSC | EX (Global export) |
| Security patch | June 2022 |
| Firmware type | Official PD Firmware |
| File format | ZIP (PD firmware package) |
| File size | 5.5 GB |
| Package contents | boot, system, vendor and modem images with a scatter file |
| SHA-256 | 2dc5029dc08e3d18067db130c023883e70f9962d0562a86763c388d906458c79 |
What the update changes
This is not a cosmetic update. The changelog touches security, modem behaviour and the parts of the system that tend to fail after two or three years of use.
- Build PD1801F_EX_A_9.0.5.5.W50 replaces older EX packages and keeps the Global export modem configuration intact.
- The package includes updated vendor blobs, which often fixes Bluetooth pairing problems on older builds.
- Battery drain reports that followed the previous patch are addressed in this build, according to the changelog summary.
- Network switching between 4G and 5G has been adjusted for carriers in Global export.
- Storage cleanup rules are revised so that system updates no longer fail because of a full cache partition.
- Security patch level is June 2022, which covers the vulnerabilities listed in that month's Android bulletin.
How to install the firmware
The process below is the one that matches this package. Read every step before you touch the phone, and keep the log window visible so you can see where a failure happens.
- Install vivo USB Driver 1.0.8 and extract SP Flash Tool v5.2 and the firmware archive on the PC.
- Open the scatter file inside the package if the tool asks for one. For OFP packages, load the .ofp file directly.
- Power off the phone and remove the SIM tray if the model requires it.
- Hold Volume Up and connect the USB cable to enter download or EDL mode. The tool should detect the port.
- Select Download Only for an update that keeps data, or Firmware Upgrade for a full repair.
- Press Download or Start and wait while the tool writes the partitions.
- Do not touch the phone until the tool reports a green success message.
- Disconnect the cable and hold Power for ten seconds if the phone does not restart by itself.
- Check the build number in Settings after the first boot to confirm the flash worked.
What the screens should show
The images below show the screens to compare before and after flashing. Keep the same file names and alt text if you replace them with your own captures so search engines can still match them to the model.
File name: v11i-v1801-about-phone.svg | Alt text: Vivo V11i V1801 about phone screenshot
File name: v11i-v1801-software-information.svg | Alt text: Vivo V11i V1801 software information screenshot
File name: v11i-v1801-firmware-package.svg | Alt text: Vivo V11i V1801 firmware package screenshot
File name: v11i-v1801-flashing-tool.svg | Alt text: Vivo V11i V1801 flashing tool screenshot
Why the OTA did not install
When an over the air update fails on the V11i, the phone often ends up worse than before. These are the causes I see most often, and each one is fixed by the same full package rather than by another OTA attempt.
- A custom recovery or root modification changed the boot image, so the signature check rejected the OTA.
- The OTA download finished on a weak connection and the verification step silently failed.
- The battery fell below the minimum level during the reboot, which interrupted the write.
Flashing PD1801F_EX_A_9.0.5.5.W50 writes every partition from scratch, so it does not matter which of these interrupted the original update.
Questions about this firmware
Is a Google Drive mirror available?
Not for this build. Use the official brand support page linked above. Mirror copies are often repacked and cannot be trusted for a repair.
Can I install this firmware without a PC?
No. SP Flash Tool v5.2 needs a Windows computer and a USB cable. OTA updates are different, but this package is a complete image that has to be written from a PC.
Is this PD1801F_EX_A_9.0.5.5.W50 firmware official?
Yes. The package is a signed official pd firmware released for the V1801, and it is the same file an authorised service centre would use for a software reinstall.
Does it work on the dual SIM version?
Yes, the V1801 (PD variant) variant uses the same system image. The model check may still display the single SIM name, which is normal.
Do I need to root the phone first?
No. Root is not required and can actually cause the flash to fail on devices with verified boot. Use the official package on an unmodified phone.
Is the bootloader unlocked by this process?
No. Flashing an official package does not unlock the bootloader, and on most Vivo models the bootloader stays locked unless you use the manufacturer's unlock programme.
Does this fix IMEI or network problems?
It restores the software side of the modem, which fixes many network problems. It cannot repair a missing IMEI caused by hardware damage or illegal modification.