Download Infinix GT 20 Pro X6873 Stock ROM - X6873-H520CBQ-260610V331 Android 15
Infinix GT 20 Pro | X6873 | Updated November 2026

The Infinix GT 20 Pro has been around since 2024, and the Android 15 build described here is the latest complete package published for the X6873. Published for Global, the 3.6 GB package installs Android 15 with XOS 14.0 and the June 2026 security update. It is intended for software repair only, not for bypassing account locks, carrier restrictions or security features.
A slow first boot of five to ten minutes is normal after a full firmware write. Read the compatibility section before downloading, because the model code matters more than the marketing name. Charge the battery above 50 percent and use the original USB cable if you can find it.
Firmware highlights
What follows is the short version of the changelog, written for people who want to know whether flashing is worth the effort.
- Security patch level is June 2026, which covers the vulnerabilities listed in that month's Android bulletin.
- Storage cleanup rules are revised so that system updates no longer fail because of a full cache partition.
- The package includes updated vendor blobs, which often fixes Bluetooth pairing problems on older builds.
- Charging behaviour at low battery percentages is tuned to reduce heat during fast charging.
- The package is a full ZIP with scatter file image, not an incremental OTA, so it repairs partition level corruption as well.
- The boot image is signed, so the phone stays on the official verified boot chain after flashing.
Error messages and what they mean
Most failed flashes fall into one of six patterns. Match the message on your screen with the table before you change anything on the phone.
| Problem | What to do |
|---|---|
| No network service after the flash | The region code does not match the SIM. Flash the package for your country, or restore the modem backup if you made one. |
| SP Flash Tool shows a DA download error | Install the MediaTek VCOM driver again, hold Volume Up while connecting, and disable driver signature enforcement before retrying. |
| Stuck on the brand logo after a successful flash | Boot to recovery, wipe cache and data, then restart. If it still fails, the package may be for a different regional variant. |
| The write reaches 99 percent and freezes | Wait five minutes, then check the log. If no partition is progressing, stop the tool, reconnect and flash again with a different USB port. |
| Invalid scatter file in SP Flash Tool | Point the tool at the scatter file inside the extracted folder, not at the ZIP, and make sure the file was not renamed. |
| Phone boots straight to recovery after flashing | The data partition is encrypted with the old key. Perform a factory reset from recovery, then let the phone rebuild the partition. |
If the phone shows a hardware fault such as a swollen battery, a cracked board or liquid damage, software cannot fix it. Stop and take the device to an authorised service centre.
Where to download GT 20 Pro firmware
Package X6873-H520CBQ-260610V331 is distributed as a ZIP with scatter file of 3.6 GB for Global. The same archive is used for a repair install and for a clean reinstall, so you only need to download it once.
this Infinix firmware and recovery guide
No Google Drive mirror is published for this build. Third party mirrors often carry modified files, so use the official package and verify the SHA-256 value.
Load the scatter file in SP Flash Tool v5.2, tick only the partitions you need and choose Download Only for an update or Firmware Upgrade for a full repair.
Before you download: compatibility
Compatibility is decided by the model code, not by the name printed on the box. Read this list before you connect the phone.
- X6873 only. The package checks the model string before it writes anything, and a mismatch stops the flash.
- Dual SIM versions sold as X6873 (Global) use the same system image and are covered by this build.
- Regional codes IN (India), NG (Nigeria), PK (Pakistan), ID (Indonesia) share the same hardware, but flashing a different CSC changes carrier settings and may disable local features.
- Do not flash a 5G variant with this package. The modem firmware and partition table are different.
- Carrier locked units should stay on the CSC that matches the SIM lock, otherwise the phone may ask for a network code after boot.
Complete firmware details
These are the details that matter before you download anything. Compare the model code and build string with the phone in your hand, not with a listing photo.
| Brand | Infinix |
| Model number | X6873 |
| Device | GT 20 Pro |
| Android version | Android 15 |
| OS version | XOS 14.0 |
| Firmware version | X6873-H520CBQ-260610V331 |
| Build number | X6873-H520CBQ-260610V331 |
| Region / CSC | GL (Global) |
| Security patch | June 2026 |
| Firmware type | Official Stock ROM |
| File format | ZIP with scatter file |
| File size | 3.6 GB |
| Package contents | boot, system, vendor, userdata and preloader images with a scatter file |
| SHA-256 | 0a1d08b799e4933549aa78822b7a74765d87418d057c66bb575ac88c83a0dffd |
How to install the firmware
The process below is the one that matches this package. Read every step before you touch the phone, and keep the log window visible so you can see where a failure happens.
- Install Infinix USB Driver 1.0.6 and MediaTek VCOM and extract both SP Flash Tool v5.2 and the firmware ZIP.
- Open SP Flash Tool, click the scatter loading button and choose the scatter file from the extracted folder.
- Confirm that boot, system, vendor and userdata are ticked. Leave preloader ticked only for a full repair.
- Switch to the Download tab and choose Download Only or Firmware Upgrade.
- Power off the phone, then hold Volume Up or Volume Down while connecting USB, depending on the model.
- Wait for the tool to detect the MediaTek port and begin writing.
- Keep the cable connected until the green circle appears and the tool reports Download OK.
- Disconnect the phone and hold Power for fifteen seconds. The logo should appear within a minute.
- If the tool stops at DA download, reinstall the VCOM driver and try another USB port.
Screens to compare
The images below show the screens to compare before and after flashing. Keep the same file names and alt text if you replace them with your own captures so search engines can still match them to the model.
File name: gt-20-pro-x6873-about-phone.svg | Alt text: Infinix GT 20 Pro X6873 about phone screenshot
File name: gt-20-pro-x6873-software-information.svg | Alt text: Infinix GT 20 Pro X6873 software information screenshot
File name: gt-20-pro-x6873-firmware-package.svg | Alt text: Infinix GT 20 Pro X6873 firmware package screenshot
File name: gt-20-pro-x6873-flashing-tool.svg | Alt text: Infinix GT 20 Pro X6873 flashing tool screenshot
Tools for this installation
Use the versions listed here unless the brand support page says otherwise. Mixing an old flashing tool with a new bootloader is the usual reason a flash fails at the first partition.
| Item | Version | Purpose |
|---|---|---|
| USB driver | Infinix USB Driver 1.0.6 and MediaTek VCOM | Lets Windows recognise the phone in download or fastboot mode. |
| Flashing tool | SP Flash Tool v5.2 | Writes the firmware partitions and checks the package signature. |
| Archive tool | 7-Zip 24.08 | Extracts tar, tgz and zip packages without corrupting them. |
| PC requirements | Windows 10 or 11, 8 GB RAM, 15 GB free disk | Enough space for the archive, the extraction and the log files. |
Frequently asked questions
Will flashing erase my data?
A full flash wipes the internal storage. If you choose the keep data option in the flashing tool, your files can survive, but a backup is still the safer choice.
Which flashing tool version should I use?
SP Flash Tool v5.2 is the version that matches this build. Newer tools usually work, but avoid very old releases because they may not recognise the partition layout.
How do I confirm the Android version after flashing?
Open Settings, About phone and check the Android version and build number. They should read Android 15 and X6873-H520CBQ-260610V331.
Do I need to root the phone first?
No. Root is not required and can actually cause the flash to fail on devices with verified boot. Use the official package on an unmodified phone.
Is a Google Drive mirror available?
Not for this build. Use the official brand support page linked above. Mirror copies are often repacked and cannot be trusted for a repair.
Does this fix IMEI or network problems?
It restores the software side of the modem, which fixes many network problems. It cannot repair a missing IMEI caused by hardware damage or illegal modification.
Is this X6873-H520CBQ-260610V331 firmware official?
Yes. The package is a signed official stock rom released for the X6873, and it is the same file an authorised service centre would use for a software reinstall.