Download 2201116SC Flash File - Xiaomi Redmi Note 11E Pro V14.0.4.0.LFSID Android 13
Xiaomi Redmi Note 11E Pro | 2201116SC | Updated November 2026

If a factory reset and a cache wipe have already failed, the next step for the Redmi Note 11E Pro is a complete Android 13 stock firmware install using Mi Flash Tool 2024.01.09. Published for Indonesia, the 4.5 GB package installs Android 13 with MIUI 14 and the February 2026 security update. It is the right file when the phone hangs on the logo, restarts during calls or shows a system UI error after an update.
Keep the extracted folder on the PC until the phone has booted normally at least once. Back up photos, chats, contacts and authenticator codes first, because a full flash wipes the internal storage.
Error messages and what they mean
Most failed flashes fall into one of six patterns. Match the message on your screen with the table before you change anything on the phone.
| Problem | What to do |
|---|---|
| The tool cannot see the phone at all | Check Device Manager for an unknown device, reinstall the driver and try a cable that supports data rather than charging only. |
| No network service after the flash | The region code does not match the SIM. Flash the package for your country, or restore the modem backup if you made one. |
| FRP or account verification appears after setup | The phone still has the previous owner's account. Official firmware does not remove account locks; use the recovery options available to the rightful owner. |
| Phone boots straight to recovery after flashing | The data partition is encrypted with the old key. Perform a factory reset from recovery, then let the phone rebuild the partition. |
| The write reaches 99 percent and freezes | Wait five minutes, then check the log. If no partition is progressing, stop the tool, reconnect and flash again with a different USB port. |
| Fastboot reports waiting for device | Install the bootloader interface driver, enable USB debugging if the system boots, and confirm the command prompt is opened in the platform tools folder. |
If the phone shows a hardware fault such as a swollen battery, a cracked board or liquid damage, software cannot fix it. Stop and take the device to an authorised service centre.
Which models this firmware fits
Compatibility is decided by the model code, not by the name printed on the box. Read this list before you connect the phone.
- 2201116SC only. The package checks the model string before it writes anything, and a mismatch stops the flash.
- Dual SIM versions sold as 2201116SC (global) use the same system image and are covered by this build.
- Regional codes MIXM (Global), IN (India), EU (Europe), TR (Turkey) share the same hardware, but flashing a different CSC changes carrier settings and may disable local features.
- Do not flash a 5G variant with this package. The modem firmware and partition table are different.
- Carrier locked units should stay on the CSC that matches the SIM lock, otherwise the phone may ask for a network code after boot.
Where to download Redmi Note 11E Pro firmware
Package V14.0.4.0.LFSID is distributed as a TGZ (fastboot package) of 4.5 GB for Indonesia. The same archive is used for a repair install and for a clean reinstall, so you only need to download it once.
the official Xiaomi firmware support page
Always confirm the model code on the download page before you start. A package built for a different variant can pass the checksum and still leave the phone without network service.
Extract the TGZ, point Mi Flash Tool at the folder and choose clean all for a full repair or save user data for an update.
Required drivers and tools
Use the versions listed here unless the brand support page says otherwise. Mixing an old flashing tool with a new bootloader is the usual reason a flash fails at the first partition.
| Item | Version | Purpose |
|---|---|---|
| USB driver | Xiaomi USB Driver 2.2.0 | Lets Windows recognise the phone in download or fastboot mode. |
| Flashing tool | Mi Flash Tool 2024.01.09 | Writes the firmware partitions and checks the package signature. |
| Archive tool | 7-Zip 24.08 | Extracts tar, tgz and zip packages without corrupting them. |
| PC requirements | Windows 10 or 11, 8 GB RAM, 15 GB free disk | Enough space for the archive, the extraction and the log files. |
Firmware specification table
These are the details that matter before you download anything. Compare the model code and build string with the phone in your hand, not with a listing photo.
| Brand | Xiaomi |
| Model number | 2201116SC |
| Device | Redmi Note 11E Pro |
| Android version | Android 13 |
| OS version | MIUI 14 |
| Firmware version | V14.0.4.0.LFSID |
| Build number | V14.0.4.0.LFSID |
| Region / CSC | ID (Indonesia) |
| Security patch | February 2026 |
| Firmware type | Official Fastboot ROM |
| File format | TGZ (fastboot package) |
| File size | 4.5 GB |
| Package contents | boot, system, vendor, product and modem images with flash scripts |
| SHA-256 | 121f113abc013d3803ceaced4af184bb12d53db1f0eb3f0bd1d92fce5c26f1c7 |
Flashing the stock ROM
The process below is the one that matches this package. Read every step before you touch the phone, and keep the log window visible so you can see where a failure happens.
- Install Xiaomi USB Driver 2.2.0 and extract Mi Flash Tool 2024.01.09 to a folder with no spaces in its path.
- Unlock the bootloader if it is still locked. Fastboot ROMs cannot be written on a locked bootloader.
- Extract the TGZ package until you see a folder containing the flash scripts and image files.
- Open Mi Flash Tool, click Select and point it at the extracted folder.
- Power off the phone, then hold Volume Down and Power to enter fastboot mode.
- Connect the cable and press Refresh in Mi Flash Tool. The device should appear with a COM port.
- Choose clean all for a full repair, or save user data if you are only updating. Do not lock the bootloader unless you are sure of the region.
- Press Flash and watch the progress. The tool prints each partition as it writes.
- When the status reads success, the phone reboots. The first start can take several minutes.
What the update changes
None of these changes alter the layout of the home screen, but several of them affect stability, heat and battery life.
- Storage cleanup rules are revised so that system updates no longer fail because of a full cache partition.
- Build V14.0.4.0.LFSID replaces older ID packages and keeps the Indonesia modem configuration intact.
- Runs Android 13 with MIUI 14 on top, matching the firmware branch that shipped for this model.
- The boot image is signed, so the phone stays on the official verified boot chain after flashing.
- Battery drain reports that followed the previous patch are addressed in this build, according to the changelog summary.
- The package is a full TGZ (fastboot package) image, not an incremental OTA, so it repairs partition level corruption as well.
What the screens should show
The images below show the screens to compare before and after flashing. Keep the same file names and alt text if you replace them with your own captures so search engines can still match them to the model.
File name: redmi-note-11e-pro-2201116sc-about-phone.svg | Alt text: Xiaomi Redmi Note 11E Pro 2201116SC about phone screenshot
File name: redmi-note-11e-pro-2201116sc-software-information.svg | Alt text: Xiaomi Redmi Note 11E Pro 2201116SC software information screenshot
File name: redmi-note-11e-pro-2201116sc-firmware-package.svg | Alt text: Xiaomi Redmi Note 11E Pro 2201116SC firmware package screenshot
File name: redmi-note-11e-pro-2201116sc-flashing-tool.svg | Alt text: Xiaomi Redmi Note 11E Pro 2201116SC flashing tool screenshot
Common questions
Will flashing erase my data?
A full flash wipes the internal storage. If you choose the keep data option in the flashing tool, your files can survive, but a backup is still the safer choice.
Do I need to root the phone first?
No. Root is not required and can actually cause the flash to fail on devices with verified boot. Use the official package on an unmodified phone.
Why does my phone show a different region after flashing?
The CSC or region code in the package decides that. Flash the build for the country where you use the phone if you want local carrier features and update servers.
Will this remove a Google account or FRP lock?
No. Official firmware does not bypass account verification. Only the rightful owner can remove the account through the normal recovery process.
Does it work on the dual SIM version?
Yes, the 2201116SC (global) variant uses the same system image. The model check may still display the single SIM name, which is normal.
Can I downgrade to an older build?
Only if the bootloader revision on the package is equal or newer than the one already on the phone. Older revision numbers are rejected at the verification stage.
How do I confirm the Android version after flashing?
Open Settings, About phone and check the Android version and build number. They should read Android 13 and V14.0.4.0.LFSID.