Motorola Moto Razr 60 Ultra Firmware Download XT2553_U1TR33.36-78-22-9 - XT2553 Android 16 Stock ROM
Motorola Moto Razr 60 Ultra | XT2553 | Updated November 2026

A failed update on the Moto Razr 60 Ultra usually leaves the same three symptoms: a boot loop, a black screen after the logo, or a recovery menu that cannot mount data. Build XT2553_U1TR33.36-78-22-9 is what you should see in Settings after a successful flash, and the download weighs 3.7 GB. Install it when the current software is unstable, when the security patch is months behind, or when the phone was bought second hand with unknown firmware.
Read the compatibility section before downloading, because the model code matters more than the marketing name. If any step feels unclear, stop at the warning and ask before continuing rather than guessing.
What this firmware brings
The build is a maintenance release at heart, and most of the work sits under the hood rather than in the visible interface.
- Runs Android 16 with My UX on top, matching the firmware branch that shipped for this model.
- The boot image is signed, so the phone stays on the official verified boot chain after flashing.
- Security patch level is September 2026, which covers the vulnerabilities listed in that month's Android bulletin.
- Charging behaviour at low battery percentages is tuned to reduce heat during fast charging.
- App launch time and memory management changes are rolled into this build alongside the security patch.
- Camera stability in low light and video recording at 1080p are the two areas the changelog mentions most often.
Region codes for this model
Motorola ships the same hardware with different regional packages. The CSC or region code decides which carrier profiles, languages and update servers the phone uses after flashing.
| Code | Region | Build |
|---|---|---|
| RETIN | India | XT2553_U1TR33.36-77-22-9 |
| RETEU | Europe | XT2553_U1TR33.36-76-22-9 |
| RETGB | United Kingdom | XT2553_U1TR33.36-75-22-9 |
| RETAIL | Latin America | XT2553_U1TR33.36-78-22-9 |
| RETAPAC | Asia Pacific | XT2553_U1TR33.36-73-22-9 |
| RETBR | Brazil | XT2553_U1TR33.36-72-22-9 |
The bold row is the package described on this page. If you are repairing a phone for use in another country, choose the row that matches the SIM you will actually use.
Firmware details at a glance
These are the details that matter before you download anything. Compare the model code and build string with the phone in your hand, not with a listing photo.
| Brand | Motorola |
| Model number | XT2553 |
| Device | Moto Razr 60 Ultra |
| Android version | Android 16 |
| OS version | My UX |
| Firmware version | XT2553_U1TR33.36-78-22-9 |
| Build number | XT2553_U1TR33.36-78-22-9 |
| Region / CSC | RETAIL (Latin America) |
| Security patch | September 2026 |
| Firmware type | Official Fastboot Firmware |
| File format | ZIP (XML fastboot package) |
| File size | 3.7 GB |
| Package contents | boot, system, vendor, modem and gpt images with flashfile.xml |
| SHA-256 | 3db470a1b43a5ba8a4709b8e71d6ed1140ec0f09d803951c9d2d937ca540c58e |
Where to download Moto Razr 60 Ultra firmware
Package XT2553_U1TR33.36-78-22-9 is distributed as a ZIP (XML fastboot package) of 3.7 GB for Latin America. The same archive is used for a repair install and for a clean reinstall, so you only need to download it once.
this Motorola firmware and recovery guide
If the download stops halfway, delete the partial file and start again. A truncated archive is the most common cause of a checksum error in RSD Lite.
Unpack the ZIP, keep the folder structure intact and either run the included flash script or load the XML package in RSD Lite and press Start.
Fixes for common flashing errors
Most failed flashes fall into one of six patterns. Match the message on your screen with the table before you change anything on the phone.
| Problem | What to do |
|---|---|
| Checksum error during extraction | The download is incomplete. Delete it, clear the browser cache and download the archive again before extracting. |
| RSD Lite says failed flashing process | Reinstall Motorola Device Manager 2.5.4, close any other phone software, and run RSD Lite as administrator with the package extracted to a short path. |
| Phone heats up and reboots during the flash | Stop the process, let the phone cool for twenty minutes and use a powered USB port. Heat during a write usually means the battery is failing. |
| Phone boots straight to recovery after flashing | The data partition is encrypted with the old key. Perform a factory reset from recovery, then let the phone rebuild the partition. |
| Hab check failed for boot | The boot image is not signed for this device. Use the untouched XML package and do not mix images from another build. |
| Battery drains faster than before | Give the phone three charge cycles to settle, then check battery usage for a background app that is holding the device awake. |
If the phone shows a hardware fault such as a swollen battery, a cracked board or liquid damage, software cannot fix it. Stop and take the device to an authorised service centre.
How to install the firmware
The process below is the one that matches this package. Read every step before you touch the phone, and keep the log window visible so you can see where a failure happens.
- Install Motorola Device Manager 2.5.4, then extract the fastboot package with 7-Zip. RSD Lite or the bundled script can write it.
- Install Android platform tools if you plan to flash with fastboot commands instead of RSD Lite.
- Power off the phone, then hold Volume Down and Power to enter fastboot mode.
- Connect the cable and confirm the device appears with fastboot devices.
- Open flashfile.xml to see the partition list, or load the package in RSD Lite.
- Run the provided flash script. It writes boot, system, vendor and modem in sequence.
- Do not lock the bootloader unless the package specifically includes the lock command.
- Wait for the script to finish and the phone to reboot.
- If the phone stays in fastboot, run the script again from the beginning rather than skipping a partition.
Package contents explained
The archive is not a single file. Knowing which image does what helps you understand why a partial flash can leave the phone half working.
| Image | Approx. size | Purpose |
|---|---|---|
| boot.img | 0.07 GB | Kernel and ramdisk used during startup. |
| system.img | 1.78 GB | Android system, preinstalled apps and framework files. |
| vendor.img | 0.81 GB | Hardware libraries, camera and modem interfaces. |
| product.img | 0.52 GB | Regional apps, themes and carrier customisation. |
| modem.img | 0.11 GB | Radio firmware for the Latin America network bands. |
Extracted sizes vary by region and by the compression method used. The numbers above are close estimates for this 3.7 GB package, not a guarantee.
Screenshot checklist
The images below show the screens to compare before and after flashing. Keep the same file names and alt text if you replace them with your own captures so search engines can still match them to the model.
File name: moto-razr-60-ultra-xt2553-about-phone.svg | Alt text: Motorola Moto Razr 60 Ultra XT2553 about phone screenshot
File name: moto-razr-60-ultra-xt2553-software-information.svg | Alt text: Motorola Moto Razr 60 Ultra XT2553 software information screenshot
File name: moto-razr-60-ultra-xt2553-firmware-package.svg | Alt text: Motorola Moto Razr 60 Ultra XT2553 firmware package screenshot
File name: moto-razr-60-ultra-xt2553-flashing-tool.svg | Alt text: Motorola Moto Razr 60 Ultra XT2553 flashing tool screenshot
First boot checks
A successful write is only half the job. These checks catch the small problems that are easier to fix before you rely on the phone again.
- Open Settings, About phone and confirm the build number matches XT2553_U1TR33.36-78-22-9.
- Test calls, mobile data, Wi-Fi and Bluetooth before you restore your apps.
- Check that the fingerprint sensor and face unlock still work. A clean flash usually keeps them, but it is worth confirming.
- Run the camera in photo and video mode for a minute to make sure the image stabilisation initialises.
- Restore your backup only after the phone has settled for ten minutes, otherwise the restore competes with background setup.
If the build number still shows the old value, the flash did not complete. Repeat the process with a fresh extraction rather than flashing the same half unpacked folder again.
Answers before you flash
How long does the first boot take?
Expect five to ten minutes. The phone rebuilds the runtime cache and verifies the system partition, so a slow first start is normal.
Will this remove a Google account or FRP lock?
No. Official firmware does not bypass account verification. Only the rightful owner can remove the account through the normal recovery process.
Is this XT2553_U1TR33.36-78-22-9 firmware official?
Yes. The package is a signed official fastboot firmware released for the XT2553, and it is the same file an authorised service centre would use for a software reinstall.
Which flashing tool version should I use?
Motorola RSD Lite 6.2.4 or fastboot is the version that matches this build. Newer tools usually work, but avoid very old releases because they may not recognise the partition layout.
Can I flash only the system file?
A repair install needs every image in the archive. Writing a single system file often leaves the modem and regional settings untouched, so the phone can boot with the old faults still in place.
How do I confirm the Android version after flashing?
Open Settings, About phone and check the Android version and build number. They should read Android 16 and XT2553_U1TR33.36-78-22-9.
Is the bootloader unlocked by this process?
No. Flashing an official package does not unlock the bootloader, and on most Motorola models the bootloader stays locked unless you use the manufacturer's unlock programme.