Motorola Moto Razr 50 Firmware Download XT2451_RTMB31.Q3-60-49-8 - XT2451 Android 14 Stock ROM
Motorola Moto Razr 50 | XT2451 | Updated November 2026

This guide is written for the XT2451, the variant sold in Brazil, and the XT2451_RTMB31.Q3-60-49-8 build that matches it. Inside the archive you get boot, system, vendor, modem and gpt images with flashfile.xml, and the download is 3.2 GB. It is the right file when the phone hangs on the logo, restarts during calls or shows a system UI error after an update.
The steps below assume a Windows PC, a working USB port and the correct driver already installed. The whole process usually takes fifteen to twenty five minutes on a healthy USB 2.0 port. Charge the battery above 50 percent and use the original USB cable if you can find it.
What the screens should show
The images below show the screens to compare before and after flashing. Keep the same file names and alt text if you replace them with your own captures so search engines can still match them to the model.
File name: moto-razr-50-xt2451-about-phone.svg | Alt text: Motorola Moto Razr 50 XT2451 about phone screenshot
File name: moto-razr-50-xt2451-software-information.svg | Alt text: Motorola Moto Razr 50 XT2451 software information screenshot
File name: moto-razr-50-xt2451-firmware-package.svg | Alt text: Motorola Moto Razr 50 XT2451 firmware package screenshot
File name: moto-razr-50-xt2451-flashing-tool.svg | Alt text: Motorola Moto Razr 50 XT2451 flashing tool screenshot
Complete firmware details
These are the details that matter before you download anything. Compare the model code and build string with the phone in your hand, not with a listing photo.
| Brand | Motorola |
| Model number | XT2451 |
| Device | Moto Razr 50 |
| Android version | Android 14 |
| OS version | My UX |
| Firmware version | XT2451_RTMB31.Q3-60-49-8 |
| Build number | XT2451_RTMB31.Q3-60-49-8 |
| Region / CSC | RETBR (Brazil) |
| Security patch | March 2026 |
| Firmware type | Official Fastboot Firmware |
| File format | ZIP (XML fastboot package) |
| File size | 3.2 GB |
| Package contents | boot, system, vendor, modem and gpt images with flashfile.xml |
| SHA-256 | e02ee2fdc8ae4974f79b3708aebb7d06955dd219591ab7023b5c8e8650c59a82 |
Download Moto Razr 50 firmware
Package XT2451_RTMB31.Q3-60-49-8 is distributed as a ZIP (XML fastboot package) of 3.2 GB for Brazil. The same archive is used for a repair install and for a clean reinstall, so you only need to download it once.
this Motorola firmware and recovery guide
If the download stops halfway, delete the partial file and start again. A truncated archive is the most common cause of a checksum error in RSD Lite.
Unpack the ZIP, keep the folder structure intact and either run the included flash script or load the XML package in RSD Lite and press Start.
Compatibility notes
Compatibility is decided by the model code, not by the name printed on the box. Read this list before you connect the phone.
- XT2451 only. The package checks the model string before it writes anything, and a mismatch stops the flash.
- Dual SIM versions sold as XT2451-1 use the same system image and are covered by this build.
- Regional codes RETIN (India), RETEU (Europe), RETGB (United Kingdom), RETAIL (Latin America) share the same hardware, but flashing a different CSC changes carrier settings and may disable local features.
- Do not flash a 5G variant with this package. The modem firmware and partition table are different.
- Carrier locked units should stay on the CSC that matches the SIM lock, otherwise the phone may ask for a network code after boot.
Step by step flashing guide
The process below is the one that matches this package. Read every step before you touch the phone, and keep the log window visible so you can see where a failure happens.
- Install Motorola Device Manager 2.5.4, then extract the fastboot package with 7-Zip. RSD Lite or the bundled script can write it.
- Install Android platform tools if you plan to flash with fastboot commands instead of RSD Lite.
- Power off the phone, then hold Volume Down and Power to enter fastboot mode.
- Connect the cable and confirm the device appears with fastboot devices.
- Open flashfile.xml to see the partition list, or load the package in RSD Lite.
- Run the provided flash script. It writes boot, system, vendor and modem in sequence.
- Do not lock the bootloader unless the package specifically includes the lock command.
- Wait for the script to finish and the phone to reboot.
- If the phone stays in fastboot, run the script again from the beginning rather than skipping a partition.
Firmware highlights
None of these changes alter the layout of the home screen, but several of them affect stability, heat and battery life.
- Battery drain reports that followed the previous patch are addressed in this build, according to the changelog summary.
- Wi-Fi calling and VoLTE profiles for Brazil operators are included in the regional data.
- Camera stability in low light and video recording at 1080p are the two areas the changelog mentions most often.
- The boot image is signed, so the phone stays on the official verified boot chain after flashing.
- Touch response and proximity sensor behaviour during calls are recalibrated in this release.
- Runs Android 14 with My UX on top, matching the firmware branch that shipped for this model.
Error messages and what they mean
Most failed flashes fall into one of six patterns. Match the message on your screen with the table before you change anything on the phone.
| Problem | What to do |
|---|---|
| Battery drains faster than before | Give the phone three charge cycles to settle, then check battery usage for a background app that is holding the device awake. |
| Checksum error during extraction | The download is incomplete. Delete it, clear the browser cache and download the archive again before extracting. |
| The tool cannot see the phone at all | Check Device Manager for an unknown device, reinstall the driver and try a cable that supports data rather than charging only. |
| Fastboot reports a partition error | The package and the phone have different partition tables. Confirm the model with fastboot getvar all before flashing anything else. |
| Phone boots straight to recovery after flashing | The data partition is encrypted with the old key. Perform a factory reset from recovery, then let the phone rebuild the partition. |
| Phone heats up and reboots during the flash | Stop the process, let the phone cool for twenty minutes and use a powered USB port. Heat during a write usually means the battery is failing. |
If the phone shows a hardware fault such as a swollen battery, a cracked board or liquid damage, software cannot fix it. Stop and take the device to an authorised service centre.
Frequently asked questions
Do I need to root the phone first?
No. Root is not required and can actually cause the flash to fail on devices with verified boot. Use the official package on an unmodified phone.
Can I flash only the system file?
A repair install needs every image in the archive. Writing a single system file often leaves the modem and regional settings untouched, so the phone can boot with the old faults still in place.
Is the bootloader unlocked by this process?
No. Flashing an official package does not unlock the bootloader, and on most Motorola models the bootloader stays locked unless you use the manufacturer's unlock programme.
Does this fix IMEI or network problems?
It restores the software side of the modem, which fixes many network problems. It cannot repair a missing IMEI caused by hardware damage or illegal modification.
The file size looks different from the listing. What now?
Compare the SHA-256 value rather than the size in megabytes. Different browsers report compressed sizes slightly differently, but the hash must match exactly.
Will this remove a Google account or FRP lock?
No. Official firmware does not bypass account verification. Only the rightful owner can remove the account through the normal recovery process.
Is this XT2451_RTMB31.Q3-60-49-8 firmware official?
Yes. The package is a signed official fastboot firmware released for the XT2451, and it is the same file an authorised service centre would use for a software reinstall.