X6789 Stock ROM Download - Infinix Note 30 Pro Firmware X6789-H696CDP-251217V582 Android 13
Infinix Note 30 Pro | X6789 | Updated November 2026
This guide is written for the X6789, the variant sold in Nigeria, and the X6789-H696CDP-251217V582 build that matches it. Firmware X6789-H696CDP-251217V582 is the current release for Nigeria, and the archive is 3.1 GB once compressed. Use the package for a clean reinstall before selling the phone, so the next owner starts on a known official build.
A slow first boot of five to ten minutes is normal after a full firmware write. Charge the battery above 50 percent and use the original USB cable if you can find it. Do not unplug the cable while the progress bar is moving, even if the tool appears frozen for a minute.
Firmware facts for this build
These are the details that matter before you download anything. Compare the model code and build string with the phone in your hand, not with a listing photo.
| Brand | Infinix |
| Model number | X6789 |
| Device | Note 30 Pro |
| Android version | Android 13 |
| OS version | XOS 10.0 |
| Firmware version | X6789-H696CDP-251217V582 |
| Build number | X6789-H696CDP-251217V582 |
| Region / CSC | NG (Nigeria) |
| Security patch | December 2025 |
| Firmware type | Official Stock ROM |
| File format | ZIP with scatter file |
| File size | 3.1 GB |
| Package contents | boot, system, vendor, userdata and preloader images with a scatter file |
| SHA-256 | d0c7ef752d955fc029ab9167e24abf5de784c540b6b89fd57e2a51ea73ff37d5 |
Package contents explained
The archive is not a single file. Knowing which image does what helps you understand why a partial flash can leave the phone half working.
| Image | Approx. size | Purpose |
|---|---|---|
| boot.img | 0.06 GB | Kernel and ramdisk used during startup. |
| system.img | 1.49 GB | Android system, preinstalled apps and framework files. |
| vendor.img | 0.68 GB | Hardware libraries, camera and modem interfaces. |
| product.img | 0.43 GB | Regional apps, themes and carrier customisation. |
| modem.img | 0.09 GB | Radio firmware for the Nigeria network bands. |
Extracted sizes vary by region and by the compression method used. The numbers above are close estimates for this 3.1 GB package, not a guarantee.
Changes in this firmware
What follows is the short version of the changelog, written for people who want to know whether flashing is worth the effort.
- Runs Android 13 with XOS 10.0 on top, matching the firmware branch that shipped for this model.
- The boot image is signed, so the phone stays on the official verified boot chain after flashing.
- Security patch level is December 2025, which covers the vulnerabilities listed in that month's Android bulletin.
- Charging behaviour at low battery percentages is tuned to reduce heat during fast charging.
- Battery drain reports that followed the previous patch are addressed in this build, according to the changelog summary.
- Camera stability in low light and video recording at 1080p are the two areas the changelog mentions most often.
Note 30 Pro firmware download links
Package X6789-H696CDP-251217V582 is distributed as a ZIP with scatter file of 3.1 GB for Nigeria. The same archive is used for a repair install and for a clean reinstall, so you only need to download it once.
this Infinix firmware and recovery guide
No Google Drive mirror is published for this build. Third party mirrors often carry modified files, so use the official package and verify the SHA-256 value.
Load the scatter file in SP Flash Tool v5.2, tick only the partitions you need and choose Download Only for an update or Firmware Upgrade for a full repair.
Checks after installation
A successful write is only half the job. These checks catch the small problems that are easier to fix before you rely on the phone again.
- Open Settings, About phone and confirm the build number matches X6789-H696CDP-251217V582.
- Test calls, mobile data, Wi-Fi and Bluetooth before you restore your apps.
- Check that the fingerprint sensor and face unlock still work. A clean flash usually keeps them, but it is worth confirming.
- Run the camera in photo and video mode for a minute to make sure the image stabilisation initialises.
- Restore your backup only after the phone has settled for ten minutes, otherwise the restore competes with background setup.
If the build number still shows the old value, the flash did not complete. Repeat the process with a fresh extraction rather than flashing the same half unpacked folder again.
Flashing the stock ROM
The process below is the one that matches this package. Read every step before you touch the phone, and keep the log window visible so you can see where a failure happens.
- Install Infinix USB Driver 1.0.6 and MediaTek VCOM and extract both SP Flash Tool v5.2 and the firmware ZIP.
- Open SP Flash Tool, click the scatter loading button and choose the scatter file from the extracted folder.
- Confirm that boot, system, vendor and userdata are ticked. Leave preloader ticked only for a full repair.
- Switch to the Download tab and choose Download Only or Firmware Upgrade.
- Power off the phone, then hold Volume Up or Volume Down while connecting USB, depending on the model.
- Wait for the tool to detect the MediaTek port and begin writing.
- Keep the cable connected until the green circle appears and the tool reports Download OK.
- Disconnect the phone and hold Power for fifteen seconds. The logo should appear within a minute.
- If the tool stops at DA download, reinstall the VCOM driver and try another USB port.
When the flash fails
Most failed flashes fall into one of six patterns. Match the message on your screen with the table before you change anything on the phone.
| Problem | What to do |
|---|---|
| Invalid scatter file in SP Flash Tool | Point the tool at the scatter file inside the extracted folder, not at the ZIP, and make sure the file was not renamed. |
| Stuck on the brand logo after a successful flash | Boot to recovery, wipe cache and data, then restart. If it still fails, the package may be for a different regional variant. |
| Checksum error during extraction | The download is incomplete. Delete it, clear the browser cache and download the archive again before extracting. |
| Battery drains faster than before | Give the phone three charge cycles to settle, then check battery usage for a background app that is holding the device awake. |
| Phone boots straight to recovery after flashing | The data partition is encrypted with the old key. Perform a factory reset from recovery, then let the phone rebuild the partition. |
| The tool cannot see the phone at all | Check Device Manager for an unknown device, reinstall the driver and try a cable that supports data rather than charging only. |
If the phone shows a hardware fault such as a swollen battery, a cracked board or liquid damage, software cannot fix it. Stop and take the device to an authorised service centre.
Choose the right region
Infinix ships the same hardware with different regional packages. The CSC or region code decides which carrier profiles, languages and update servers the phone uses after flashing.
| Code | Region | Build |
|---|---|---|
| GL | Global | X6789-H696CDP-251217V577 |
| IN | India | X6789-H696CDP-251217V572 |
| NG | Nigeria | X6789-H696CDP-251217V582 |
| PK | Pakistan | X6789-H696CDP-251217V562 |
| ID | Indonesia | X6789-H696CDP-251217V557 |
| EG | Egypt | X6789-H696CDP-251217V552 |
The bold row is the package described on this page. If you are repairing a phone for use in another country, choose the row that matches the SIM you will actually use.
Firmware FAQ
Can I install this firmware without a PC?
No. SP Flash Tool v5.2 needs a Windows computer and a USB cable. OTA updates are different, but this package is a complete image that has to be written from a PC.
Which flashing tool version should I use?
SP Flash Tool v5.2 is the version that matches this build. Newer tools usually work, but avoid very old releases because they may not recognise the partition layout.
Can I downgrade to an older build?
Only if the bootloader revision on the package is equal or newer than the one already on the phone. Older revision numbers are rejected at the verification stage.
Is the bootloader unlocked by this process?
No. Flashing an official package does not unlock the bootloader, and on most Infinix models the bootloader stays locked unless you use the manufacturer's unlock programme.
Will this remove a Google account or FRP lock?
No. Official firmware does not bypass account verification. Only the rightful owner can remove the account through the normal recovery process.
Does it work on the dual SIM version?
Yes, the X6789 (Global) variant uses the same system image. The model check may still display the single SIM name, which is normal.
The file size looks different from the listing. What now?
Compare the SHA-256 value rather than the size in megabytes. Different browsers report compressed sizes slightly differently, but the hash must match exactly.