23013RK75G Firmware Download - Xiaomi Redmi K60 Android 14 OS1.0.1.0.JNKIN
Xiaomi Redmi K60 | 23013RK75G | Updated November 2026

The Xiaomi Redmi K60 is popular enough that modified firmware and repacked ROMs circulate widely, so it helps to know exactly which build number belongs to the 23013RK75G. Firmware version OS1.0.1.0.JNKIN is a complete TGZ (fastboot package) of 5.7 GB, so it can repair a phone that no longer boots into the system. Use it to recover a soft brick, roll back a broken update, fix persistent system errors or prepare the phone for resale.
Back up photos, chats, contacts and authenticator codes first, because a full flash wipes the internal storage. Keep the extracted folder on the PC until the phone has booted normally at least once.
Firmware screenshots
The images below show the screens to compare before and after flashing. Keep the same file names and alt text if you replace them with your own captures so search engines can still match them to the model.
File name: redmi-k60-23013rk75g-about-phone.svg | Alt text: Xiaomi Redmi K60 23013RK75G about phone screenshot
File name: redmi-k60-23013rk75g-software-information.svg | Alt text: Xiaomi Redmi K60 23013RK75G software information screenshot
File name: redmi-k60-23013rk75g-firmware-package.svg | Alt text: Xiaomi Redmi K60 23013RK75G firmware package screenshot
File name: redmi-k60-23013rk75g-flashing-tool.svg | Alt text: Xiaomi Redmi K60 23013RK75G flashing tool screenshot
What this firmware brings
None of these changes alter the layout of the home screen, but several of them affect stability, heat and battery life.
- Battery drain reports that followed the previous patch are addressed in this build, according to the changelog summary.
- Charging behaviour at low battery percentages is tuned to reduce heat during fast charging.
- Storage cleanup rules are revised so that system updates no longer fail because of a full cache partition.
- The package is a full TGZ (fastboot package) image, not an incremental OTA, so it repairs partition level corruption as well.
- Touch response and proximity sensor behaviour during calls are recalibrated in this release.
- The boot image is signed, so the phone stays on the official verified boot chain after flashing.
Redmi K60 firmware download links
Package OS1.0.1.0.JNKIN is distributed as a TGZ (fastboot package) of 5.7 GB for India. The same archive is used for a repair install and for a clean reinstall, so you only need to download it once.
the official Xiaomi firmware support page
The link above opens the brand level support page, where the package is described together with the safety notes. Keep that page open while you flash.
Extract the TGZ, point Mi Flash Tool at the folder and choose clean all for a full repair or save user data for an update.
Troubleshooting the installation
Most failed flashes fall into one of six patterns. Match the message on your screen with the table before you change anything on the phone.
| Problem | What to do |
|---|---|
| Battery drains faster than before | Give the phone three charge cycles to settle, then check battery usage for a background app that is holding the device awake. |
| No network service after the flash | The region code does not match the SIM. Flash the package for your country, or restore the modem backup if you made one. |
| Proximity sensor stops working after the update | Recalibrate the sensor from the hidden service menu or flash the previous build. This is a known issue on a small number of units. |
| FRP or account verification appears after setup | The phone still has the previous owner's account. Official firmware does not remove account locks; use the recovery options available to the rightful owner. |
| Checksum error during extraction | The download is incomplete. Delete it, clear the browser cache and download the archive again before extracting. |
| Mi Flash stops with a bootloader locked message | The fastboot ROM requires an unlocked bootloader. Unlock it through the official tool, then start the flash again from the first step. |
If the phone shows a hardware fault such as a swollen battery, a cracked board or liquid damage, software cannot fix it. Stop and take the device to an authorised service centre.
Flashing the stock ROM
The process below is the one that matches this package. Read every step before you touch the phone, and keep the log window visible so you can see where a failure happens.
- Install Xiaomi USB Driver 2.2.0 and extract Mi Flash Tool 2024.01.09 to a folder with no spaces in its path.
- Unlock the bootloader if it is still locked. Fastboot ROMs cannot be written on a locked bootloader.
- Extract the TGZ package until you see a folder containing the flash scripts and image files.
- Open Mi Flash Tool, click Select and point it at the extracted folder.
- Power off the phone, then hold Volume Down and Power to enter fastboot mode.
- Connect the cable and press Refresh in Mi Flash Tool. The device should appear with a COM port.
- Choose clean all for a full repair, or save user data if you are only updating. Do not lock the bootloader unless you are sure of the region.
- Press Flash and watch the progress. The tool prints each partition as it writes.
- When the status reads success, the phone reboots. The first start can take several minutes.
Firmware specification table
These are the details that matter before you download anything. Compare the model code and build string with the phone in your hand, not with a listing photo.
| Brand | Xiaomi |
| Model number | 23013RK75G |
| Device | Redmi K60 |
| Android version | Android 14 |
| OS version | HyperOS 1.0 |
| Firmware version | OS1.0.1.0.JNKIN |
| Build number | OS1.0.1.0.JNKIN |
| Region / CSC | IN (India) |
| Security patch | July 2026 |
| Firmware type | Official Fastboot ROM |
| File format | TGZ (fastboot package) |
| File size | 5.7 GB |
| Package contents | boot, system, vendor, product and modem images with flash scripts |
| SHA-256 | 0e85e441dcb619ef322904e38db3dae5e4128d2556534a908f3526f6820f3bed |
Compatibility notes
Compatibility is decided by the model code, not by the name printed on the box. Read this list before you connect the phone.
- 23013RK75G only. The package checks the model string before it writes anything, and a mismatch stops the flash.
- Dual SIM versions sold as 23013RK75G (global) use the same system image and are covered by this build.
- Regional codes MIXM (Global), EU (Europe), TR (Turkey), ID (Indonesia) share the same hardware, but flashing a different CSC changes carrier settings and may disable local features.
- Do not flash a 5G variant with this package. The modem firmware and partition table are different.
- Carrier locked units should stay on the CSC that matches the SIM lock, otherwise the phone may ask for a network code after boot.
Common questions
Can I downgrade to an older build?
Only if the bootloader revision on the package is equal or newer than the one already on the phone. Older revision numbers are rejected at the verification stage.
Which flashing tool version should I use?
Mi Flash Tool 2024.01.09 is the version that matches this build. Newer tools usually work, but avoid very old releases because they may not recognise the partition layout.
Is a Google Drive mirror available?
Not for this build. Use the official brand support page linked above. Mirror copies are often repacked and cannot be trusted for a repair.
Does this fix IMEI or network problems?
It restores the software side of the modem, which fixes many network problems. It cannot repair a missing IMEI caused by hardware damage or illegal modification.
The file size looks different from the listing. What now?
Compare the SHA-256 value rather than the size in megabytes. Different browsers report compressed sizes slightly differently, but the hash must match exactly.
Is the bootloader unlocked by this process?
No. Flashing an official package does not unlock the bootloader, and on most Xiaomi models the bootloader stays locked unless you use the manufacturer's unlock programme.
Does it work on the dual SIM version?
Yes, the 23013RK75G (global) variant uses the same system image. The model check may still display the single SIM name, which is normal.